Taking:
If the disc does not start, occurs in all cycles. If you do not even starting, check the power from 120 Volt ac.If the voltage is correct, it must be the problem machine. When the voltage is not advisable to check whether a fuse has blown or tripped the electric field, or it could be a problem in your system.
If the problem is more than just a blown fuse or tripped circuit breaker, go take care of licensed electricians.
Pressure Cooker
L 'Push-Pull Switch Timer:
The timer push / pull switch is located inside the timer power switch, this switch in a washing machine. If this option is not closed when it is suspected, the disc is not to start.You have your wiring diagram to see which contacts check.If timer push / pull-Check is defective, replace the entire set of timer.
The line:
The line is connected to the mains at home. If one of the cables or connections in the spinal cord arebroken, the cable will not be able to make connections in the socket job.Loose finally damaged the cable connector and this could be why the washing machine is starting.
Engine:
The engine is the heart of the machine. The engine should start easily and smoothly. If the motor hums, buzzes, or performed a difficult time, it's a good chance that overheats and stops working mid-cycle.
Most of the repairs on a disk are simple to do if you have andIdeas have one or more parts that you need to check. Also, it helps to be able to control the parties to ensure that they are good or bad before replacing it.
Replacement of parts by the method could be expensive and guess frustrating.There are many sites, very good information on how to have repairs to do on your own if you want to do.
If you need to call a handyman, ask questions and get a quote for repair. To find out if you need to fix it or replace it.
washing machine will not start what should I do?
No comments:
Post a Comment